Masters in Geological Engineering

One Choice, Infinite Horizons

Program Overview

The Geological Engineering program at Brookwood University combines geology and engineering to address earth-related challenges. Students learn to analyze geological data, assess natural hazards, and design engineering solutions for projects involving the earth's materials.

Courses offered in Masters Degree in GEOLOGICAL ENGINEERING

Module 1

  • Course Name

  • Credit Hours

  • Engineering Ethics

    Engineering ethics examines and sets the obligations by engineers to society, to their clients, and to the profession. As a scholarly discipline, it is closely related to subjects such as the philosophy of science, the philosophy of engineering, and the ethics of technology.

  • 6 Credits

  • View

  • Latest Developments in Engineering

    Latest developments in engineering discusses about the latest trends in engineering which keep on adding new subjects and new versions of old subjects and techniques.

  • 6 Credits

  • View

  • Engineering Numerical Methods

    This course covers the basic methods for obtaining numerical solutions with a digital computer. Included are methods for the solution of algebraic and transcendental equations, simultaneous linear equations, ordinary and partial differential equations, and curve fitting techniques. The methods are compared with respect to computational efficiency and accuracy.

  • 6 Credits

  • View

  • E-Engineering

    This course offers a comprehensive yet practical exploration of basic electrical and electronic concepts, hands-on applications, and troubleshooting. The course focuses on fundamental principles and their applications to solving real circuit analysis problems, and devotes six chapters to examining electronic devices.

  • 6 Credits

  • View

  • Engineering Management

    This course serves as an introduction to engineering management. Topics include Introduction, Planning, Organizing, Financial Accounting And Analysis, Marketing Management, Engineering Management In The New Millennium, Ethics In Engineering/Business Management and Globalization.

  • 6 Credits

  • View

Module 2

Program Overview

  • Eligibility Criteria
    Bachelor's Degree or equiv. international education

  • Credit Hours
    60 Hours

  • Courses Offered
    10

  • Course Duration
    1 Year (Self-Paced)

  • Estimated Fee
    $27,000

Engineering Fundamentals And Technical Proficiency:

The College of Engineering is designed to establish a strong foundation in engineering fundamentals and technical proficiency. Students start by building a deep understanding of core engineering disciplines and gain hands-on experience in problem-solving and innovation. This technical base prepares students for a successful career in the dynamic field of engineering.

Real-World Applications And Industry Partnerships:

Beyond the classroom, our College of Engineering places a significant emphasis on real-world applications and industry partnerships. Students have opportunities to work on engineering projects, collaborate with engineering firms, and engage in research with cutting-edge technology. These experiences not only enhance their practical engineering skills but also provide valuable insights into the industry.

Global Engineering Challenges And International Collaborations:

The College of Engineering at Brookwood University is committed to addressing global engineering challenges and fostering international collaborations. Our curriculum explores international engineering practices and encourages students to engage in projects with global impact. Additionally, we offer study abroad programs and collaborate with engineers from around the world, enabling students to gain a global perspective on engineering.

Engineering Ethics

Topics Covered in This Course:
  In Section 1 of this course you will cover these topics:
    Introduction.
  In Section 2 of this course you will cover these topics:
    Putting the issues in context.
  In Section 3 of this exam you will be evaluated on below listed topics:
    The role of professional codes of ethics.
  In Section 4 of this course you will cover these topics:
    The engineer's responsibilities to society.
  In Section 5 of this course you will cover these topics:
    Obligations to clients and fairplay in engineering.

Latest developments in engineering

Topics Covered in This Course:
  In Section 1 of this course you will cover these topics:
    Introduction.
    Vectors and tensors.
  In Section 2 of this course you will cover these topics:
    Stress.
    Principal stresses and principal axes.
  In Section 3 of this exam you will be evaluated on below listed topics:
    Analysis of deformation.
    Velocity fields and compatibility conditions.
  In Section 4 of this course you will cover these topics:
    Constitutive equations.
    Isotropy.
  In Section 5 of this course you will cover these topics:
    Mechanical properties of real fluids and solids.
    Derivation of field equations.
    Field equations and boundary conditions in fluid mechanics.
    Some simple problems in elasticity.
    Stress, strain, and active remodeling of structures.

Engineering Numerical Methods

Topics Covered in This Course:
  In Section 1 of this course you will cover these topics:
    An essay on numerical methods
    Numbers
    Function evaluation
    Real zeros
  In Section 2 of this course you will cover these topics:
    Complex zeros
    Zeros of polynomials
    Linear equations and matrix inversion
    Random numbers
  In Section 3 of this exam you will be evaluated on below listed topics:
    The difference calculus
    Roundoff
    The summation calculus
    Infinite series
    Difference equations
  In Section 4 of this course you will cover these topics:
    Polynomial interpolation
    Formulas using function values
    Error terms
    Formulas using derivatives
    Formulas using differences
    Formulas using the sample points as parameters
  In Section 5 of this course you will cover these topics:
    Composite formulas
    Indefinite integrals-feedback
    Introduction to differential equations
    A general theory of predictor-corrector methods
    Special methods of integrating ordinary differential equations
    Least squares: practice theory
    Orthogonal functions
    Least squares: practice
    Chebyshev approximation: theory
    Chebyshev approximation: practice
    Rational function approximation
    Fourier series: periodic functions
    Convergence of fourier series

E-engineering

Topics Covered in This Course:
  In Section 1 of this course you will cover these topics:
    Quantities and units
    Voltage, current, and resistance
    Ohms law, energy, and power
  In Section 2 of this course you will cover these topics:
    Series circuits
    Parallel circuits
    Series-parallel circuits
  In Section 3 of this exam you will be evaluated on below listed topics:
    Magnetism and electromagnetism
    Introduction to alternating current and voltage
    Capacitors
  In Section 4 of this course you will cover these topics:
    Rc circuits
    Inductors
    Rl circuits
  In Section 5 of this course you will cover these topics:
    Rlc circuits and resonance
    Time response of reactive circuits
    Transformers
    Diodes and applications
    Transistors and applications
    The operational amplifier
    Basic op-amp circuits
    Special-purpose op-amp circuits

Engineering Management

Topics Covered in This Course:
  In Section 1 of this course you will cover these topics:
    Introduction to management challenges for engineers.
    Planning.
  In Section 2 of this course you will cover these topics:
    Organizing.
    Leading.
  In Section 3 of this exam you will be evaluated on below listed topics:
    Controlling.
    Cost accounting for engineering managers.
  In Section 4 of this course you will cover these topics:
    Financial accounting and analysis for engineering managers.
    Managerial finance for engineering managers.
    Marketing management for engineering managers.
  In Section 5 of this course you will cover these topics:
    Engineers as managers/leaders.
    Ethics in engineering/business management.
    Web-based enablers for engineering and management.
    Globalization.
    Engineering management in the new millennium.

Geological Engineering Systems Engineering

Topics Covered in This Course:
  In Section 1 Fundamentals of Systems Engineering of this course you will cover these topics:
  • Systems Engineering Process
  • Requirements Analysis
  • System Design and Architecture
  In Section 2 Integration and Testing of this course you will cover these topics:
  • Systems Integration Techniques
  • Testing and Validation
  • Quality Assurance
  In Section 3 Project Management of this course you will cover these topics:
  • Planning and Scheduling
  • Risk Management
  • Cost and Resource Management
  In Section 4 Systems Engineering Tools of this course you will cover these topics:
  • Modelling and Simulation
  • Systems Engineering Software
  • Case Studies
  In Section 5 Advanced Topics in Systems Engineering of this course you will cover these topics:
  • Systems of Systems
  • Complex System Integration
  • Future Trends in Geological Systems Engineering

Advanced Geological Engineering Structures

Topics Covered in This Course:
  In Section 1 Advanced Structural Analysis of this course you will cover these topics:
  • Advanced Finite Element Methods
  • Dynamic Loading and Response
  • Structural Stability and Failure Modes
  In Section 2 Composite Structures of this course you will cover these topics:
  • Advanced Composite Materials
  • Fabrication and Testing
  • Structural Applications
  In Section 3 Smart Structures of this course you will cover these topics:
  • Integration of Sensors and Actuators
  • Health Monitoring Systems
  • Adaptive and Morphing Structures
  In Section 4 Lightweight Structures of this course you will cover these topics:
  • Design for Weight Reduction
  • High
  • Case Studies of Modern Geological Structures
  In Section 5 Innovations in Structural Engineering of this course you will cover these topics:
  • Emerging Materials and Technologies
  • Advanced Manufacturing Techniques
  • Future Trends in Geological Structures

Computational Geological Engineering Systems

Topics Covered in This Course:
  In Section 1 Introduction to Computational Methods of this course you will cover these topics:
  • Basic Principles and Equations
  • Numerical Methods and Algorithms
  • Computational Tools
  In Section 2 Modelling Geological Systems of this course you will cover these topics:
  • Types of Models
  • Model Development and Validation
  • Case Studies
  In Section 3 Simulation Techniques of this course you will cover these topics:
  • Dynamic Simulation
  • Finite Element Analysis
  • Multi-Physics Simulations
  In Section 4 Data Analysis and Visualization of this course you will cover these topics:
  • Data Processing Techniques
  • Visualization Tools
  • Interpretation of Results
  In Section 5 Applications of Computational Methods of this course you will cover these topics:
  • Rock and Soil Modelling
  • Geohazard Assessment
  • Advanced Geological System Design

Geological Engineering Design

Topics Covered in This Course:
  In Section 1 Introduction to Design in Geological Engineering of this course you will cover these topics:
  • Design Principles and Methodologies
  • Problem Solving and Creativity
  • Design Process
  In Section 2 Design Tools and Techniques of this course you will cover these topics:
  • Computer
  • Prototyping and Testing
  • Design Optimization
  In Section 3 Design of Geological Structures of this course you will cover these topics:
  • Design Criteria and Specifications
  • Safety and Environmental Considerations
  • Case Studies
  In Section 4 Design of Geotechnical Systems of this course you will cover these topics:
  • Foundation Design
  • Slope Stability Design
  • Retaining Wall Design
  In Section 5 Innovative Design Solutions of this course you will cover these topics:
  • Sustainable and Eco
  • Smart Technologies
  • Future Trends in Geological Design

Geological Engineering Dynamics

Topics Covered in This Course:
  In Section 1 Dynamics of Geological Systems of this course you will cover these topics:
  • Modelling Geological Processes
  • Dynamic Response Analysis
  • Stability and Control
  In Section 2 Control Systems in Geological Engineering of this course you will cover these topics:
  • Fundamentals of Control Theory
  • Feedback and Control Mechanisms
  • Control System Design
  In Section 3 Monitoring and Instrumentation of this course you will cover these topics:
  • Geotechnical Instrumentation
  • Data Acquisition and Analysis
  • Real
  In Section 4 Modelling and Simulation of this course you will cover these topics:
  • Computational Modelling Techniques
  • Simulation Tools for Geological Systems
  • Case Studies
  In Section 5 Advanced Topics in Geological Control of this course you will cover these topics:
  • Adaptive and Predictive Control
  • Intelligent Systems and Automation
  • Innovations in Geological Control Systems
✖

Course Details