Masters in Aerospace Engineering

One Choice, Infinite Horizons

Program Overview

The Aerospace Engineering program at Brookwood University is dedicated to preparing students for careers in the aerospace industry. Students delve into the principles of aerodynamics, spacecraft design, and aerospace technology. They gain the knowledge and skills necessary to contribute to the development of aircraft and spacecraft, as well as innovations in the field of aerospace engineering.

Courses offered in Masters Degree in AEROSPACE ENGINEERING

Module 1

  • Course Name

  • Credit Hours

  • Engineering Ethics

    Engineering ethics examines and sets the obligations by engineers to society, to their clients, and to the profession. As a scholarly discipline, it is closely related to subjects such as the philosophy of science, the philosophy of engineering, and the ethics of technology.

  • 6 Credits

  • View

  • Latest Developments in Engineering

    Latest developments in engineering discusses about the latest trends in engineering which keep on adding new subjects and new versions of old subjects and techniques.

  • 6 Credits

  • View

  • Engineering Numerical Methods

    This course covers the basic methods for obtaining numerical solutions with a digital computer. Included are methods for the solution of algebraic and transcendental equations, simultaneous linear equations, ordinary and partial differential equations, and curve fitting techniques. The methods are compared with respect to computational efficiency and accuracy.

  • 6 Credits

  • View

  • E-Engineering

    This course offers a comprehensive yet practical exploration of basic electrical and electronic concepts, hands-on applications, and troubleshooting. The course focuses on fundamental principles and their applications to solving real circuit analysis problems, and devotes six chapters to examining electronic devices.

  • 6 Credits

  • View

  • Engineering Management

    This course serves as an introduction to engineering management. Topics include Introduction, Planning, Organizing, Financial Accounting And Analysis, Marketing Management, Engineering Management In The New Millennium, Ethics In Engineering/Business Management and Globalization.

  • 6 Credits

  • View

Module 2

Program Overview

  • Eligibility Criteria
    Bachelor's Degree or equiv. international education

  • Credit Hours
    60 Hours

  • Courses Offered
    10

  • Course Duration
    1 Year (Self-Paced)

  • Estimated Fee
    $27,000

Engineering Fundamentals And Technical Proficiency:

The College of Engineering is designed to establish a strong foundation in engineering fundamentals and technical proficiency. Students start by building a deep understanding of core engineering disciplines and gain hands-on experience in problem-solving and innovation. This technical base prepares students for a successful career in the dynamic field of engineering.

Real-World Applications And Industry Partnerships:

Beyond the classroom, our College of Engineering places a significant emphasis on real-world applications and industry partnerships. Students have opportunities to work on engineering projects, collaborate with engineering firms, and engage in research with cutting-edge technology. These experiences not only enhance their practical engineering skills but also provide valuable insights into the industry.

Global Engineering Challenges And International Collaborations:

The College of Engineering at Brookwood University is committed to addressing global engineering challenges and fostering international collaborations. Our curriculum explores international engineering practices and encourages students to engage in projects with global impact. Additionally, we offer study abroad programs and collaborate with engineers from around the world, enabling students to gain a global perspective on engineering.

Engineering Ethics

Topics Covered in This Course:
  In Section 1 of this course you will cover these topics:
    Introduction.
  In Section 2 of this course you will cover these topics:
    Putting the issues in context.
  In Section 3 of this exam you will be evaluated on below listed topics:
    The role of professional codes of ethics.
  In Section 4 of this course you will cover these topics:
    The engineer's responsibilities to society.
  In Section 5 of this course you will cover these topics:
    Obligations to clients and fairplay in engineering.

Latest developments in engineering

Topics Covered in This Course:
  In Section 1 of this course you will cover these topics:
    Introduction.
    Vectors and tensors.
  In Section 2 of this course you will cover these topics:
    Stress.
    Principal stresses and principal axes.
  In Section 3 of this exam you will be evaluated on below listed topics:
    Analysis of deformation.
    Velocity fields and compatibility conditions.
  In Section 4 of this course you will cover these topics:
    Constitutive equations.
    Isotropy.
  In Section 5 of this course you will cover these topics:
    Mechanical properties of real fluids and solids.
    Derivation of field equations.
    Field equations and boundary conditions in fluid mechanics.
    Some simple problems in elasticity.
    Stress, strain, and active remodeling of structures.

Engineering Numerical Methods

Topics Covered in This Course:
  In Section 1 of this course you will cover these topics:
    An essay on numerical methods
    Numbers
    Function evaluation
    Real zeros
  In Section 2 of this course you will cover these topics:
    Complex zeros
    Zeros of polynomials
    Linear equations and matrix inversion
    Random numbers
  In Section 3 of this exam you will be evaluated on below listed topics:
    The difference calculus
    Roundoff
    The summation calculus
    Infinite series
    Difference equations
  In Section 4 of this course you will cover these topics:
    Polynomial interpolation
    Formulas using function values
    Error terms
    Formulas using derivatives
    Formulas using differences
    Formulas using the sample points as parameters
  In Section 5 of this course you will cover these topics:
    Composite formulas
    Indefinite integrals-feedback
    Introduction to differential equations
    A general theory of predictor-corrector methods
    Special methods of integrating ordinary differential equations
    Least squares: practice theory
    Orthogonal functions
    Least squares: practice
    Chebyshev approximation: theory
    Chebyshev approximation: practice
    Rational function approximation
    Fourier series: periodic functions
    Convergence of fourier series

E-engineering

Topics Covered in This Course:
  In Section 1 of this course you will cover these topics:
    Quantities and units
    Voltage, current, and resistance
    Ohms law, energy, and power
  In Section 2 of this course you will cover these topics:
    Series circuits
    Parallel circuits
    Series-parallel circuits
  In Section 3 of this exam you will be evaluated on below listed topics:
    Magnetism and electromagnetism
    Introduction to alternating current and voltage
    Capacitors
  In Section 4 of this course you will cover these topics:
    Rc circuits
    Inductors
    Rl circuits
  In Section 5 of this course you will cover these topics:
    Rlc circuits and resonance
    Time response of reactive circuits
    Transformers
    Diodes and applications
    Transistors and applications
    The operational amplifier
    Basic op-amp circuits
    Special-purpose op-amp circuits

Engineering Management

Topics Covered in This Course:
  In Section 1 of this course you will cover these topics:
    Introduction to management challenges for engineers.
    Planning.
  In Section 2 of this course you will cover these topics:
    Organizing.
    Leading.
  In Section 3 of this exam you will be evaluated on below listed topics:
    Controlling.
    Cost accounting for engineering managers.
  In Section 4 of this course you will cover these topics:
    Financial accounting and analysis for engineering managers.
    Managerial finance for engineering managers.
    Marketing management for engineering managers.
  In Section 5 of this course you will cover these topics:
    Engineers as managers/leaders.
    Ethics in engineering/business management.
    Web-based enablers for engineering and management.
    Globalization.
    Engineering management in the new millennium.

Non-Linear Systems

Topics Covered in This Course:
  In Section 1 of this course you will cover these topics:
    Introduction.
    Phase plane analysis.
  In Section 2 of this course you will cover these topics:
    Fundamentals of lyapunov theory.
    Advanced stability theory.
  In Section 3 of this exam you will be evaluated on below listed topics:
    Describing function analysis.
    Feedback linearization.
  In Section 4 of this course you will cover these topics:
    Sliding control.
  In Section 5 of this course you will cover these topics:
    Adaptive control basic concepts in adaptive control.
    Control of multi-input physical systems.

Space Flight Dynamics

Topics Covered in This Course:
  In Section 1 of this course you will cover these topics:
    Introduction.
    Two-body orbital mechanics.
  In Section 2 of this course you will cover these topics:
    Geocentric orbits and trajectories.
    Time of flight.
  In Section 3 of this exam you will be evaluated on below listed topics:
    Interplanetary tranfers.
    Vehicle and booster performance.
  In Section 4 of this course you will cover these topics:
    Atmospheric entry.
    Orbital elements and earth tracks.
  In Section 5 of this course you will cover these topics:
    The ballistic missile.
    Attitude dynamics and control.

Advanced Aerodynamics

Topics Covered in This Course:
  In Section 1 of this course you will cover these topics:
    Introduction.
    Preliminary estimate of take-off weight.
  In Section 2 of this course you will cover these topics:
    Wing loading selection.
    Main wing design.
  In Section 3 of this exam you will be evaluated on below listed topics:
    Fuselage design.
    Horizontal and vertical tail design.
  In Section 4 of this course you will cover these topics:
    Engine selection.
    Take-off and landing.
  In Section 5 of this course you will cover these topics:
    Enhanced lift design.
    Structural design and material selection.
    Static stability and control.
    Cost estimate.
    Design summary and trade study.

Digital Control System

Topics Covered in This Course:
  In Section 1 of this course you will cover these topics:
    Introduction.
    Discrete-time systems and the z-transform.
  In Section 2 of this course you will cover these topics:
    Sampling and reconstruction.
    Open-loop discrete-time systems.
  In Section 3 of this exam you will be evaluated on below listed topics:
    Closed-loop systems.
    System time-response characteristics.
  In Section 4 of this course you will cover these topics:
    Stability analysis techniques.
    Digital controller design.
    Pole-assignment design and state estimation.
    Linear quadratic optimal control.
  In Section 5 of this course you will cover these topics:
    Sampled-data transformation of analog filters.
    Digital filter structures.
    Microcomputer implementation of digital filters.

Aerospace Fluid flows

Topics Covered in This Course:
  In Section 1 of this course you will cover these topics:
    Introduction to viscous flows.
    Integral equations and solutions for laminar flow.
  In Section 2 of this course you will cover these topics:
    Differential equations of motion for laminar flow.
    Exact and numerical solutions for laminar constant-property incompressible flows.
  In Section 3 of this exam you will be evaluated on below listed topics:
    Transition to turbulent flow.
    Wall-bounded, incompressible turbulent flows.
  In Section 4 of this course you will cover these topics:
    Internal flows.
    Free shear flows.
  In Section 5 of this course you will cover these topics:
    Wall-bounded turbulent flows with variable density and heat and mass transfer.
    Three-dimensional external boundary layer flows.
✖

Course Details